Quantcast CLEANING - TM-10-3930-664-24_428
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 1 Remove   front   windshield   wiper   arm   (1)   from wiper motor (2). 2 Remove  clamp  (3)  securing  electrical  wiring  to instrument panel by removing screw (4). 3 Remove nut  (5)  and  collar  (6)  from  wiper  motor shaft. 4 Remove wiper motor (2) from cab front panel by removing screw (7) and nut (8). 5 Remove   rear   windshield   wiper   arm   (9)   from wiper motor (10). 6 Remove   nut   (11)   and   collar   (12)   from   wiper motor shaft. 7 Remove  wiper  motor  (10)  from  ROPS  frame  by removing screw (13) and nut (14). 8 Tag and disconnect electrical wiring from windshield wiper motors (2, 10). B.  CLEANING Clean   windshield   wiper   assemblies   in accordance with paragraph 1-24. C.  INSPECTION 1 Inspect        wiper        assemblies        and        related components in accordance with paragraph 1-24. 2 Inspect  wiper  blade  (1)  and  wiper  arm  (2)  for damage or deformation.  Replace as required. 3 Replace wiper motor (3) if windshield wiper fails to operate or does not operate smoothly. 4 Repair    of    the    windshield    wiper    assembly    is limited to removal and replacement of damaged components. 2-379

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business