Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-134.  FENDER REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App. ) Batteries disconnected (para. 2-78) Personnel Required: 2 Personnel A.  REMOVAL WARNING Electrical    shock    hazard.        Disconnect battery   ground   cable   or   power   source prior to working on electrical components.    Failure   to   heed   warning could  cause  shock,  injury  or  death.    If electrical  shock  occurs,  administer  first aid and seek medical assistance immediately. 1. Tag   and   disconnect   electrical   wiring   from   left front fender lights. WARNING Front    fender    assembly    is    heavy    and awkward to handle.  Enlist the aid of an assistant    when    removing    to    prevent injury    to    personnel    and    damage    to components. 2. Remove  left  front  fender  assembly  (1)  from  roll over     bracket     (2)     by     removing     screws     (3), washers (4), and nuts (5). 3. Remove   left   front   fender   assembly   (1)    from chassis (6) by removing screws (7) and nuts (8). 4. Remove left front fender brace (9) from left front fender assembly br removing screw (10), washer (12), and nut (11). 2-356

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business