TM 10-3930-664-24 2. REMOVE    HANDLE FROM STEERING SELECTOR   VALVE (5) BY REMOVING HANDLE PIN (6) AND COTTER PIN (7). DISCARD COTTER PIN. 3. REMOVE    STEERING    SELECTOR    VALVE    (5). REMOVE TUBE ASSEMBLY (9) AND ALL FITTINGS. a. Remove  steering  selector  valve  (5)  from  floor plate by removing screws (8). b. Tag   and   disconnect   tube   assembly   (9)   from elbow (10) and tee (11). c. Remove   reducer   (12)   and   elbow   (13)   from steering      selector      valve      (5).   Remove   and discard O-ring (14). d. Remove elbow (10), shutoff valve (15), tee (16), and  fittings  (17,  18).      Remove  and  discard  o- ring (19). e. Remove elbow (20), tee (11), reducer (21), and fitting  (22).      Remove  and  discard  o-rings  (23, 24). B. CLEANING Clean     steering     selector     valve     in     accordance     with paragraph 1-24. C. INSPECTION Inspect selector valve and related components in accordance with paragraph 1-24. 2-331