TM 10-3930-664-24 Section XVI.  WHEEL MAINTENANCE Paragraph Title Page Number Number 2-113 Wheel Assembly Replacement 2-307 2-114 Wheel Assembly Repair 2-309 2-115 Tire Replacement 2-312 2-116 Tire Repair 2-314 2-113. WHEEL ASSEMBLY REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App.  E) Torque Wrench (32, App.  E) Hydraulic Jack (7, App.  E) Jack Stands (8, App.  E) (4 ea.) Socket Wrench Set, 3/4" Drive (55, App.  E) A. REMOVAL WARNING Rear axle oscillates relative to the frame.  When jacking the front of the unit, stabilize the frame with jack stands before jacking.  Failure to stabilize the frame may result in personnel injury or damage to equipment. 1. Before jacking unit to remove front wheels, place jack stands under each side of frame just in front of rear axle.  Adjust jack stands as necessary during jacking. WARNING Wheels are heavy and awkward.  Enlist the help of an assistant when removing wheels to prevent injury to personnel and damage to components. 2-307