TM 10-3930-664-24 3. Tag and disconnect tube assembly (1) from front axle tee (7). 4. Tag and disconnect tube assembly (2) from front axle tee (8). 5. Remove tee (8), tubes (9), and fittings (10,  11) from front axle  (15).Remove  and discard O-rings (12). 6. Tag and disconnect vent hose assembly (13) from fitting (14).  Remove fitting from front axle (15). 7. Remove vent (16) and fitting (17) from vent hose assembly (13).  Remove and discard O-ring (18). 8. Tag and disconnect parking brake hose assembly (19) from fitting (20).  Remove fitting from parking brake cylinder.  Remove and discard O-ring (21). 9. Release hood assembly (22) by lifting handle (23). Open hood assembly. 10.  Remove top transmission cover (24) by removing nine screws (25) and washers (26). 11.  Tag and disconnect parking brake hose assembly(19) from rear fitting on differential lock  solenoid valve (27).  Solenoid valve is located on left side of transmission. 12.  Tag and disconnect tube assembly (28) from tee (7). Disconnect tube assemblies (28, 29) from fitting (30). 2-303