TM 10-3930-664-24 D.  INSTALLATION CAUTION Hold brake pedal weldment in place while installing to prevent damage to components.  Use care when installing brake rods into master cylinders. 1. Lift brake pedal weldment (4) and carefully insert brake rods (12) into master cylinders (13). 2. Position brake pedal weldment (4) against ROPS frame, aligning top of weldment with seat pivot (9). 3. Ensure thrust washers (10, 11) are installed on pivot (8).  Push in  seat  pivot  (7)  to  insert  pivot  into  welded  seat pivot (9). 4. While holding brake pedal weldment (4) in place, install screw (5) and washer (6). 5. master cylinder cover (1) onto ROPS frame using screws (2) and washers (3). FOLLOW-ON MAINTENANCE: Adjust brake pedal assembly (para.  2-109) END OF TASK 2-296