Quantcast DISC BRAKE ASSEMBLY ADJUSTMENT
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-107.  DISC BRAKE ASSEMBLY ADJUSTMENT This task covers: Adjustment INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App.  E) A.  ADJUSTMENT 1. Locate  three  adjusting  bolts  (1)  on  axle  case. These bolts are used to adjust brake disc gap. 2. Loosen locknut (2) on all three bolts (1). 3. Turn  bolts  (I)  counterclockwise  until  tight.    Back off  bolts  one  full  turn.   Tighten locknuts (2). 4. This adjustment  will  result  in  a  gap  of  0.04  inch (1.0 mm) between brake discs. FOLLOW-ON MAINTENANCE: None END OF TASK 2-294

Integrated Publishing, Inc.