Quantcast DISC BRAKE ASSEMBLY INSPECTION
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-106.  DISC BRAKE ASSEMBLY INSPECTION This task covers: Inspection INITIAL SETUP: Tools and Test Equipment: General Mechanics Tool Kit (1, App.  E) A.  INSPECTION 1. Remove filler plugs (1) from axle case. 2. Insert    feeler    gauge    through    filler    opening    in intermediate cover. 3. Measure   thickness   of   brake   discs   (Detail   A). Minimum   thickness   shall   be   0.175   inch   (4.5 mm). 4. Replace   brake   discs   if   thickness   is   less   than minimum requirement (para.  4-36). 5. Reinstall plugs (1). FOLLOW-ON MAINTENANCE: None END OF TASK 2-293

Integrated Publishing, Inc.