Quantcast FRONT AND REAR DRIVE SHAFT REPLACEMENT
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-99.  FRONT AND REAR DRIVE SHAFT REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Personnel Required: General Mechanics Tool Kit (1, App.  E) 2 Personnel Torque Wrench (32, App.  E) Jack Stands (8, App.  E) (2 ea.) Materials / Parts: Lockwasher, Item 4 (4 ea.) Locknut, Item 7 (4 ea.) Lockwasher, Item 10 (4 ea.) Locknut, Item 13 (4 ea.) A.  REMOVAL WARNING Drive  shafts  are  heavy  and  awkward. Enlist    the    help    of    an    aide    when removing to prevent injury to personnel and damage to components. 1. Place  jack  stands  beneath  front  drive  shaft  (1). Raise stands until they meet drive shaft. CAUTION Use   care   when   removing   driveshaft to  ensure  that  tube  and  yoke  do  not separate.      Damage   to   components could result. 2. Remove  front  drive  shaft  (1)  from  transmission (2) by removing screws (3) and lockwashers (4). Discard lockwashers. 2-275

Integrated Publishing, Inc.