Quantcast OIL SAMPLING VALVE REPLACEMENT - TM-10-3930-664-24_320
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-97.  OIL SAMPLING VALVE REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Materials / Parts: General Mechanics Tool Kit (1, App.  E) Teflon Tape (35, App.  C) Loctite 242 (20, App.  C) A.  REMOVAL NOTE Sampling     valve     can     be     removed without   removing   transmission   top cover.  Remove cover only if elbow or hose replacement is required. 1. Remove transmission oil sampling valve (4) from welded pipe coupling (5).  Plug pipe coupling. 2. If required, remove top transmission cover (1) by removing nine screws (2) and washers (3). 3. Tag   and   disconnect   hose   assembly   (7)   from elbow   (6).      Remove   elbow   from   welded   pipe coupling (5). B.  CLEANING Clean oil sampling valve in accordance with paragraph 1- 24. C.  INSPECTION Inspect   valve   and   related   components   in   accordance with paragraph 1-24. 2-271

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business