Quantcast TRANSMISSION ASSEMBLY TESTING.
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-94.  TRANSMISSION ASSEMBLY TESTING This task covers: Active and static testing INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Transmission serviced (para.  2-93) Pressure Gauge (42, App.  E) STE/ICE Tester connected (para.  2-13) Tow bar lowered (para.  2-126) Materials / Parts: Loctite 242 (20, App.  C) A.  STALL TEST NOTE When    performing    stall    test,    shifter    will    not    operate    if    parking    brake    is    applied. Transmission will automatically declutch when brake pedal is fully depressed.  Automatic safety declutch must be disengaged. 1. Stall test may be conducted two ways; using the parking brake or positioning forklift against a solid barrier. a. If the parking brake method is chosen, the automatic declutch safety feature must be disengaged.  Tag and disconnect wire number 46 (purple) from parking brake solenoid. b. If solid barrier method is chosen, position forklift against a solid barrier and block wheels. CAUTION Do not operate in stall condition longer than 30 seconds at one time.  Shift speed control lever   to   neutral   for   15   seconds,   then   repeat   procedure   until   operating   temperature   is reached. Do not allow operating temperature to exceed 250 degrees F (121 C).  High temperature will damage transmission components. NOTE Engine  can  only  be  started  with  transmission  in  the  NEUTRAL  (N)  position  on  the  travel and range selector. 2-265

Integrated Publishing, Inc.