Quantcast TRANSMISSION ASSEMBLY SERVICING
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-93.  TRANSMISSION ASSEMBLY SERVICING This task covers:  Draining and Servicing Transmission and Bleeding Inching Valve INITIAL SETUP: Tools and Test Equipment: Reference: General Mechanics Tool Kit (1, App.  E) LO 10-3930-664-12 Oil Filter Tool (27, App.  E) Torque Wrench (32, App.  E) Drain Pan (10, App.  E) Materials / Parts: Personnel Required: Transmission Oil (17, App.  C) 2 personnel Loctite No.  592 (24, App.  C) Loctite No.  242 (20, App.  C) Brake Fluid (5, App.  C) Filter, Item 5 (1 ea.) A.  DRAINING 1. Open    access    door    (1)    located    on    left    side transmission cover by rotating handle (2) left. 2. Place drain pan beneath transmission drain plug (3).    Remove  plug  from  transmission  and  drain fluid. 3. Apply  a  light  coat  of  Loctite  592  to  threads  of drain plug (3). Install drain plug into transmission (4) and torque to 40-45 ft-lb. (54-61 NM). 4. Remove  filter  (5)  and  discard.    Install  new  filter and torque to 20-25 ft-lbs (27-34 Nm). 5. Close  access  door  (1)  and  secure  by  rotating handle (2) clockwise. 2-263

Integrated Publishing, Inc.