Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 H. MULTI-WIRE POLARIZED CONNECTOR 1.    DISASSEMBLE. NOTE Tag   and   label   all   wires   as   they   are removed    for    ease    of    reassembly. Indicate whether wire is connected to pin or socket-type connector. a. Using   pin   removal   tool,   push   connector terminal out of connector. b. Remove and discard terminal. 2. ASSEMBLE. a. Strip wire.  Use care not to nick or cut wire strands. NOTE If  solid  core  solder  is   used   to   coat wires,   bare   wires   must   be   cleaned with flux before tinning. b. Tin  bare  wire.    Use  rosin-core  solder  to coat bare wire. c. Insert    wire    into    new    terminal.        Crimp terminal to secure wire. d. Using pin insertion tool, install new terminal into hole of connector. 2-242

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business