Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 D. PIN OR SOCKET-TYPE CONNECTOR 1.    DISASSEMBLE. a. Slide  shell  back  on  wire  to  expose  metal components. b. Remove C-washer. c. Cut  wire  close  to  terminal.    Remove  and discard terminal. d. Remove shell. 2. ASSEMBLE. a. Strip wire.  Use care not to nick or cut wire strands. NOTE If  solid  core  solder  is   used   to   coat wires,   bare   wires   must   be   cleaned with flux before tinning. b. Tin  bare  wire.    Use  rosin-core  solder  to coat bare wire. c. Slide shell onto wire. NOTE New    terminal    must    match    size    of mating contact at terminal connection.  New terminal crimp area must match thickness of wire. d. Insert    wire    into    new    terminal.        Crimp terminal to secure wire. e. Install C-washer.  Slide  shell  up  over  new terminal and C-washer.  Ensure C-washer is firmly seated in shell. 2-239

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business