Quantcast CLEANING - TM-10-3930-664-24_280
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 3. Drive pin (7) out of lid latch (2). Remove lid latch from battery box lid (1) by removing screws (8) and nuts (9). B.  CLEANING Clean    battery    box    lid,    hold    downs,    and    latches    in accordance with paragraph 1-24. C.  INSPECTION 1. Inspect lid, hold downs, and latches in accordance with paragraph 1-24. 2. Operate  lid  latches  to  ensure  there  is  no  spring bind. D.  REPAIR 1. Repair   of   lid   latches   consists   of   removal   and replacement of defective, deformed, corroded, or damaged components. 2. Repair   battery   box   lid   and   battery   hold   down brackets in accordance with TC 9-510. E.  INSTALLATION 1. Install  lid  latch  (2)  onto  battery  box  lid  (1)  using screws  (8)  and  nuts  (9).    Drive  pin  (7)  into  lid latch. 2. Install hold down brackets (6) using wing nuts (3) and washers (4). 3. Install battery  box  lid  (1)  and  turn  lid  latches  (2) to secure. FOLLOW-ON MAINTENANCE: None END OF TASK 2-231

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business