Quantcast HORN REPLACEMENT - TM-10-3930-664-24_269
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-76.  HORN REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Batteries disconnected (para.  2-78) A.  REMOVAL WARNING Electrical  shock  hazard.    Disconnect battery ground cable or power source prior to working on electrical components.  Failure to heed warning could cause shock, injury or death.  If electrical    shock    occurs,    administer first aid and  seek  medical  assistance immediately. 1. Tag  and  disconnect  electrical  wires  from  horn (1). 2. Remove horn (I) from right front light post (2) by removing screws (3), washers (4), and mounting plate (5). B.  CLEANING Clean horn in accordance with paragraph 1-24. C.  INSPECTION Inspect  horn  and  related  components  in accordance with paragraph 1-24. 2-220

Integrated Publishing, Inc.