Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-72.  STOP INDICATOR SWITCH REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Batteries disconnected (para.  2-78) Materials / Parts: Teflon Tape (35, App.  C) Sealant (41, App.  C) A.  REMOVAL WARNING Electrical  shock  hazard.    Disconnect battery ground cable or power source prior to working on electrical components.  Failure to heed warning could cause shock, injury or death.  If electrical    shock    occurs,    administer first  aid  and  seek  medical  assistance immediately. 1. Remove sealant from switch and wiring terminals. 2. Tag and disconnect electrical wires (1) from stop indicator switch (2). 3. Remove  stop  indicator  switch  (2)  from  tee  (3). Remove teflon tape. B.  CLEANING Clean stop indicator switch in accordance with paragraph 1-24. C.  INSPECTION Inspect switch and related components in accordance with paragraph 1-24. 2-212

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business