Quantcast CLEANING - TM-10-3930-664-24_248
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 3. REMOVE LAMPS (7, 8) AND LIGHT BARS (13,    15)   FROM    COMPOSITE   LIGHT ASSEMBLY. a. Remove composite light lens (4) from light body (12) by removing three outer screws (5) and two interior screws (6). b. Carefully  remove  lamps  (7,  8)  from  light  body (12). c. Remove composite light face plate (9) from light body   (12)   by   removing   remaining   three   outer screws (10). d. Remove    packing    (11)   only   if replacement is required. e. Remove upper light bar (13) from light body (12) by  inserting  a  thin  blade  screwdriver  into  hole (14) and turning screw. f. Open  front  half  of  light  bar  (15)  from  rear  half (16) using a screwdriver. Remove light bar from light body (12) by turning internal screw (17). B. CLEANING Clean composite lights in accordance with  paragraph  1- 24. C. INSPECTION Inspect   lights   and   related   components   in   accordance with paragraph 1-24. 2-199

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business