TM 10-3930-664-24 3. REMOVE LIGHT HOUSING (15) FROM LEFT SIDE OF ROPS.  REMOVE SEALED BEAM (21). a. Tag and disconnect electrical wire (14) from light housing (15). b. Remove   light   housing   (15)  from lightmount (16)  by  removing  carriage  bolt  (17),  lockwasher (18), and nut (19). Remove ground wire (20). c. Remove   light   housing   (15)   from U-bracket (22) by removing carriage bolt (23), lockwashers (24), and nut (25). Remove bracket (26). d. Install  light  housing  (15)  into  vise.    Pull  housing away   from   sealed   beam   (21)   and   pry   sealed beam out of housing using screwdriver. e. Disconnect sealed beam (21) from light housing (15). 4. REPEAT STEP 3 FOR RIGHT FRONT FENDER LIGHT. 5. REMOVE LIGHT HOUSING (28) FROM LEFT REAR LIGHT BOX (29).  REMOVE SEALED BEAM (34). a. Tag and disconnect electrical wire (27) from light housing (28). b. Remove light housing (28) from left rear light box (29)  by  removing  carriage  bolt  (30),  lockwasher (31), and nut (32). Remove ground wire (33). c. Remove      light    housing    (28)      from  U-bracket (35) by removing carriage bolt (36), lockwashers (37), and nut (38). Remove bracket (39). d. Install  light  housing  (28)  into  vise.    Pull  housing away   from   sealed   beam   (34)   and   pry   sealed beam out of housing using screwdriver. e. Disconnect sealed beam (34) from light housing (28). 6. REPEAT STEP 5 FOR RIGHT REAR FLOOD LIGHT. 2-193