TM 10-3930-664-24 7. REMOVE DCA SHUNT (41) FROM FORKLIFT FLOOR PLATE. a.Tag and disconnect electrical cable (28) and wiring (29)  from  DCA  shunt  (41)  by  removing  screw (30) and lockwasher (31). b.Tag and disconnect electrical cable (32) and wiring (33)  from  DCA  shunt  (41)  by  removing  screw (34) and lockwasher (35). c.Tag  and disconnect electrical wiring (36, 37) from DCA    shunt    (41)    by    removing    screws    (38), lockwashers (39), and washers (40). d.Remove DCA  shunt (41) from forklift floor plate by removing   screws   (42),   lockwashers   (43),   and locknuts (44). B CLEANING Clean  STE/ICE  electrical  components   in accordance with paragraph 1-24. C. INSPECTION Inspect STE/ICE electrical components and related parts in accordance with paragraph 1-24. D. INSTALLATION 1. INSTALL   DCA    SHUNT   (41)   ONTO FORKLIFT FLOOR PLATE. a. Install DCA  shunt  (41) onto forklift floor   plate using      screws      (42),  lockwashers  (43),  and locknuts (44). b. Connect  electrical  wiring  (36,  37)  to  DCA  shunt (41)  using  screws  (38),  lockwashers  (39),  and washers (40). c. Connect  electrical  cable  (32)  and  wire  (33)  to DCA shunt (41) using screw (34) and lockwasher (35). d. Connect  electrical  cable  (28)  and  wire  (29)  to DCA shunt (41) using screw (30) and lockwasher (31). 2-187