Quantcast INSTALLATION - TM-10-3930-664-24_226
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 D.  INSTALLATION CAUTION Instrument   panel   (34)   is   large   and awkward.  Enlist  the  help  of  an  aide when    installing    to    avoid    injury    to personnel or damage to components. 1. Install   instrument   panel   (34)   using   six   screws (38) and nuts (39).  Position four wiring harness clamps  (40)  so  that  top  four  panel  screws  and nuts secure clamps. 2. Attach  instrument  panel  brace  (33)  to  bottom  of instrument  panel  (34)  using  screw  (35),  washer (36), and nut (37). 3. Connect wire (30) to ammeter negative terminal (S).  Connect wires (31, 32) to ammeter positive terminal (1). 4. Connect dash wiring harness ground wire (24) to brace    (25)    using    screw    (26),    washer    (27), lockwasher (28), and locknut (29). 5. Connect   wires   (16,   17,   18)   to   right   front   light mount  assembly.    Connect  wires  (19,    20)   to horn. 6. Connect  wires  (12,  13,  14,  15)  to  left  front  light mount assembly. 2-177

Integrated Publishing, Inc.