Quantcast INSTRUMENT PANEL REPLACEMENT - TM-10-3930-664-24_224
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-58.  INSTRUMENT PANEL REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Transmission shifter removed Drain Pan (10, App.  E) (para.  2-91) Steering column removed Materials / Parts: (para.  2-118) Wire Ties, Item, 11 (4 ea.) Personnel Required: Lockwasher, Item 18 (1 ea.) Locknut, Item 19 (1 ea.) 2 Personnel A.  REMOVAL WARNING Electrical  shock  hazard.    Disconnect battery ground cable or power source prior to working on electrical components.  Failure to heed warning could cause shock, injury or death.  If electrical    shock    occurs,    administer first aid and seek medical assistance. 1. Remove instrument panel covers (1) and master cylinder  cover  (2)  by  removing  screws  (3)  and washers (4).  Clamps (5) are secured by screws on sides of front covers.  Leave clamps attached to wiring. 2. Disconnect dash wiring harness at two plugs (6, 7). 3. Disconnect          front          floodlight          wiring          at connectors (8). 4. Remove wiring harness clamps (9) by removing screws  (10).  Leave clamps attached to wiring. 5. Remove floodlight wiring from ROPS by removing wire ties (11).  Discard wire ties. 6. Remove     sealant     from     wire     connections     at stoplight  switch  (21)  and  disconnect  two  wires (22, 23). 2-175

Integrated Publishing, Inc.