TM 10-3930-664-24 3. TAG AND DISCONNECT ELECTRICAL CABLES  AND  WIRING.    REMOVE  STARTER MOTOR (14) BY REMOVING SCREWS (15). a. Remove    nut    (6)    and    washer    (7)    from starter      stud      (10).      Remove   and   tag electrical cable (8) and two wires (9). b. Remove      electrical      wire      (11)      from bracket underneath starter motor by removing screw (12) and lockwasher (13). Tag wire. c. Tag   electrical   wire   (16)   and   cable   (17). Wire and cable will come off when outside mounting screw (15) is removed. d. Remove   starter   motor   (14)   by   removing screws (15). B.  CLEANING Clean starter motor in accordance with paragraph 1-24. C.  INSPECTION Inspect motor and related components in accordance with paragraph 1-24. D.  INSTALLATION 1. INSTALL STARTER MOTOR (14) USING SCREWS (15). CONNECT ELECTRICAL CABLES AND WIRING. a. Install  electrical  wire  (16)  and  cable  (17) onto outside mounting screw (15). b. Mate     starter     motor (14) to housing, ensuring  gear  teeth  mesh.    Secure  using screws (15). c. Attach    electrical    wire    (11)    to    bracket underneath starter motor using screw (12) and lockwasher (13). d. Install electrical cable (8) and two wires (9) onto  starter  stud  (10).    Secure  using  nut (6) and washer (7). 2. TORQUE   SCREWS   (15)   TO   32   FT-LBS   (43 N•m). 2-173

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business