| |
TM 10-3930-664-24
4.
PLACE ALTERNATOR (1) IN A VISE.
5.
USING STRAP WRENCH TO HOLD PULLEY
(16),
REMOVE
NUT
(13)
AND
SPRING
WASHER (14).
6.
USING PULLER, REMOVE RETAINER (15)
AND PULLEY (16) FROM ALTERNATOR (1).
7.
CAREFULLY
SLIDE
FAN
(17)
OFF
ALTERNATOR SHAFT.
B. CLEANING
Clean
fan,
pulley,
and
exterior
of
alternator
in
accordance with paragraph 1-24.
C. INSPFCTION
Inspect components in accordance with paragraph 1-
24.
D. INSTALLATION
1.
CAREFULLY SLIDE FAN (17) ONTO
ALTERNATOR SHAFT.
2.
INSTALL PULLEY (16) ONTO ALTERNATOR
(1). SECURE USING RETAINER (15).
3.
INSTALL NEW SPRING WASHER (14) AND
NUT (13).
4.
INSTALL MOUNTING SPACER (12). LIFT
ALTERNATOR
(1)
INTO
POSITION
AND
INSTALL MOUNTING SCREW (11).
2-169
|
