Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 2-53.  FAN GUARD REPLACEMENT This task covers: Removal, Cleaning, Inspection, and Installation INITIAL SETUP: Tools and Test Equipment: Equipment Condition: General Mechanics Tool Kit (1, App.  E) Towbar lowered (para.  2-126) A.  REMOVAL 1. Release hood assemb;y (2) by lifting handle (1). Open hood assembly. 2. Remove  fan  guard  (3)  from  radiator  shroud  by removing  screws  (4),  lockwashers  (5),  and  flat washers (6). B.  CLEANING Clean fan guard in accordance with paragraph 1-24. C.  INSPECTION Inspect  fan  guard  for  corrosion  or  damage.      Replace guard if defective. D.  INSTALLATION 1. Install  fan  guard  (3)  onto  radiator  shroud  using screws (4) and washers (5, 6). 2. Close  hood  assembly  (2).    Ensure  handle  (1)  is fully engaged. FOLLOW-ON MAINTENANCE: Raise towbar and lock in position (para.  2-126) END OF TASK 2-164

Integrated Publishing, Inc.