Quantcast CLEANING - TM-10-3930-664-24_174
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 1.     RELEASE   HOOD   ASSEMBLY   (2)      BY   LIFTING HANDLE (1).  OPEN HOOD ASSEMBLY. 2.     PLACE DRAIN PAN BENEATH FILTERS. REMOVE FUEL FILTERS (3, 6) AND FILTER HEAD (4). a. Remove fuel filter (3) from filter head (4) using a oil filter tool.  Remove and discard filter seal (5). b. Remove fuel filter (6) from filter head (4) using a strap  wrench.    Remove  and  discard  filter  seal (7). c. Remove  jam nut (8) and filter head adapter (9) from engine block. d. Remove  filter  head  (4).      Remove  and  discard ring seals (10, 11). B.  CLEANING Clean    filter    head    and    adapter    in    accordance    with paragraph 1-24. C.  INSPECTION Inspect components in accordance with paragraph 1-24. D.  INSTALLATION    1.     INSTALL FILTER HEAD (4). a. Install new ring seals (10, 11) onto filter head (4). b. Mate filter head (4) to engine block.  Install filter head adapter (9) and jam nut (8). 2.     TORQUE JAM NUT (8) TO 24 FT-LBS (32 Nm). 2-125

Integrated Publishing, Inc.