Quantcast INSTALTATION (cont) - TM-10-3930-664-24_151
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM 10-3930-664-24 7.     CONNECT   FUEL   DRAIN   LINES   (31)   TO   FOUR FUEL INJECTORS (33) USING BANJO CONNECTOR   SCREWS   (34)   AND   CONNECTOR SEALS (35). 8.     TORQUE BANJO CONNECTOR SCREWS (34) TO 11 FT-LBS (15 Nm). 9.     INSTALL HIGH PRESSURE FUEL LINES (17). a. Secure high pressure fuel lines (17) to four tube braces  at  top  of  intake  manifold  cover  (18)  as follows: (1) Install    rear    vibration    isolators    (23)    on braces (22) and position fuel lines (17). (2) Secure  fuel  lines  (17)  using  screws  (19), washers  (20),  front  tube  braces  (21),  and remaining vibration isolators (23). b. Connect fuel lines (15) to injection pump and fuel injectors (16). 10.  TORQUE   FUEL   LINE   NUTS   TO   18   FT-LBS   (24 Nm). 2-102

Integrated Publishing, Inc.