TM 10-3930-660-34 3-4. ENGINE MOUNTS - REPLACE (Cont’d) 2. TAG AND DISCONNECT ELECTRICAL LEADS FROM STARTER RELAY (3). 3. REMOVE STARTER RELAY (3). Remove two nuts (4), lockwashers (5), capscrews (6),washers (7) and starter relay (3).Discard lockwashers (5). 4. SEPARATE ENGINE MOUNTS (11,15 and 16) FROM VEHICLE FRAME. a. Remove nut (8),rebound washer (9) and capscrew (10) from rear engine mount (11).Discard rebound washer (9). b. Remove nut (12),rebound washer (13) and capscrew (14) from front engine mounts (15 and 16). Discard rebound washer (13). 5. REMOVE ENGINE MOUNTS  (11,15 and 16). a. Remove three capscrews (17) and lockwashers (18) from each side of rear engine mount (11). Discard lockwashers (18). b. Remove rear engine mount (11) from engine. c. Remove four capscrews (19) and lockwashers (20) from left front engine mount (15) and right front engine mount (16).Discard lockwashers (20). d. Remove engine mounts (15 and 16) from engine. 3-26