TM 10-3930-660-34 3-4. ENGINE MOUNTS - REPLACE This task covers: a. Removal b. Cleaning c. Inspection d. Installation Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics Lockwashers (5,18,20) Shop Equipment, Automotive Loctite 271 (App. B, Item 43) Maintenance, Common #2 Rebound Washers (9,13) Less Power Rubber Mounts (21) Tags (App. B, Item 52) Forklift Truck (capacity 2000 lb.) Two Lifting Chains (capacity 2000 lb.) Equipment Condition Radiator removed, TM10-3930-660-20. Muffler removed, TM10-3930-660-20. Engine covers and air cleaner removed, TM10-3930-660-20. NOTE "Front" and "rear" engine references used in this paragraph are relative to the front and rear of the vehicle, with engine mounted in the vehicle. The fan side of the engine is designated the rear of the engine, and the flywheel end of engine is identified as the front of the engine. REMOVAL 1. SUPPORT ENGINE WITH LIFTING CHAINS AND FORKLIFT TRUCK. a. Attach lifting chains to engine lifting brackets (1 and 2). b. Attach lifting chains to forklift forks and operate forklift just enough to remove slack from lifting chains. 3-25