TM10-3930-660-34 3-3.ENGINE ASSEMBLY - REPLACE (Cont’d) NOTE If a new engine is to be installed, remove engine components as directed in step 11. They will be installed on the new engine. 11.  IF NECESSARY, REMOVE ENGINE COMPONENTS. a.  Remove fan, TM10-3930-660-20. b.  Remove alternator, TM10-3930-660-20. c.  Remove STE/ICE fuel pressure sender and STE/ICE fuel filter differential pressure switch, TM10-3930-660-20. d.  Remove starter relay, TM10-3930-660-20. e.  Remove oil sampling valve and fittings, TM10-3930-660-20. f.  Remove engine oil pressure and water temperature switches, TM10-3930-660-20. g.  Remove engine oil pressure and water temperature senders, TM10-3930-660-20. h.  Remove engine mounts, TM10-3930-660-34. i.  Remove flywheel housing cover, para.  3-13. j.  Remove coupling from flywheel, para.  3-12. k.  Remove ether start thermostat, TM10-3930-660-20. 3-13