TM10-3930-660-34 3-3.ENGINE ASSMBLY - REPLACE (Cont’d) c.  Remove locknut (52), rebound washer (53) and capscrew (54) from rear engine mount (55).  Discard locknut (52). NOTE Weight  of  the  engine  assembly  is  approximately 1, 075 lb. 10.  REMOVE ENGINE FROM VEHICLE. a.   Attach  lifting  chains,  with  a  lifting  capacity  of  2,  000  lb.,  to  engine lifting brackets. b.  Use a forklift truck or other suitable lifting device to remove engine. Attach lifting chains to forklift forks or other suitable lifting device. c.  Raise engine high enough to clear rear frame support bar. d.          Slowly     remove     engine     through     the     back     of     the     engine compartment. e.  Place engine in a suitable engine stand. f.  Remove and discard two front rubber mounts (56) and rear rubber mount (57). NOTE There are two front rubber mounts; one under each of the two front engine mounts. 3-12