TM10-3930-660-34 16-19.   MLRS ATTACENT  CYLINDER - REPAIR (Cont’d) j. Remove washer (18) and gland (9) off rod (8). k. Remove O-ring (11) and backup ring (19) from gland (9). Discard O-ring (11). l. Remove lock pellet (20) if necessary. CAUTION Do not nick or scratch seal groove during removal of seal (21) and rod wiper (22).  Failure to follow this precaution will cause part damage. NOTE Note direction that lip of seal (21) is facing before removal. m. Remove seal (21) and rod wiper (22) from inside of gland (9). n. Use snap ring pliers to remove one snap ring (23) from bushing (24). o. Press out bushing (24) from rod (8).  Remove other snap ring (23) from bushing (24). CLEANING See Cleaning Instructions, para.  2-10. INSPECTION See Inspection Instructions, para.  2-11. 16-124