TM10-3930-660-34 3-3.  ENGINE ASSEMBLY - REPLACE This task covers: a.  Removal b.  Installation Initial Setup Tools Materials/Parts Shop Equipment, Automotive Cotter Pin (26) Maintenance, Common #2 Less Power Engine Oil (App.  B, Item 35) Locknut (38, 48, 52) Shop Equipment, Automotive Lockwashers (4, 44, 46) Maintenance and Repair; Field Loctite 271 (App.  B, Item 43) Maintenance, Basic, Less Power Rubber Mount (56, 57) Tags (App.  B, Item 52) Forklift Truck (capacity 2000 lb.) Tie Wraps (App.  B, Item 54) Engine Stand (capacity  2000  lb.) Personnel Required Two Personnel Lifting Chain (capacity 2000 lb.) Equipment Condition Engine oil drained, L010-3930-660-12. Radiator removed, TM10-3930-660-20. Air cleaner removed, TMlO-3930-660-20. Muffler removed, TM10-3930-660-20. Transmission cover removed, TM10-3930-660-20. REMOVAL 1.    NOTE  TIE  WRAP  LOCATIONS,  THEN  CUT  AND  DISCARD  ALL  TIE  WRAPS THAT SECURE ELECTRICAL WIRING, TUBING, AND HOSES TO THE ENGINE. 2.  REMOVE DRIVE SHAFT ASSEMBLY (1) FROM TRANSMISSION (2). Remove four capscrews (3) and four lockwashers (4) securing universal joint (5) of shaft assembly (1) to input yoke (6) of transmission (2).  Discard lockwashers (4). 3-4