TM10-3930-660-34 16-12.1. INNER BOOM - REPLACE/REPAIR (Cont’d) 13.  REMOVE TWO TOP WEAR PAD ASSEMBLIES (PARTS 44 and 45) FROM FRONT OF INTERMEDIATE BOOM (11). a.  Remove capscrews (41), lockwashers (42) and flatwashers (43).  Discard lockwashers (42). NOTE Note location and quantity of wear pad components.  Tag all wear pad components as removed. b.  Remove wear pad (44) and wear pad inserts (45). 14.  REMOVE TWO SIDE WEAR PAD ASSEMBLIES (PARTS 49-52) FROM FRONT OF INTERMEDIATE BOOM (11). a.  Remove capscrews (46), lockwashers (47),  and flatwashers (48).  Discard lockwashers (47). N OTE Shims (50 and 51) are used as required. Note location and quantity of shims (50 and 51) as removed. b.  Remove wear pad (49),  shims (50) and (51),  and wear pad inserts (52). 15.  REMOVE TWO BOTTOM WEAR PAD ASSEMBLIES (PARTS 56-60) FROM FRONT OFINTERMEDIATE BOOM (11). a.  Remove capscrews (53), lockwashers (54),  and flatwashers (55).  Discard lockwashers (54). NOTE Shims (59 and 60) are used as required.  Note location and quantity of shims (59 and 60) as removed. 16-62