TM10-3930-660-34 16-11.  CARRIAGE ASSEMBLY - REPLACE This task covers: a.  Removal b.  Installation INITIAL SETUP: Tools Material/Parts Tool Kit, Automotive Mechanics Anti-seize Compound (App.  C, Item 3) Locknut (4, 8) Lifting Device, 2 Ton Capacity Tags (App.  B, Item 52) Wood Blocks Cap and Plug Set Reference Equipment Condition TM10-3930-660-10 MLRS attachment fully lowered. Backrest removed, TM10-3930-660-10. Fork autoleveler switch removed TM10-3930-660-20. REMOVAL WARNING At operating temperatures, hydraulic oil is hot and under pressure.    Hot  oil  can  cause  injuries.  Allow  hydraulic  oil to cool before disconnecting any hydraulic lines. CAUTION Wipe the area clean around all hydraulic connections to be  opened  during  removal  and  disassembly.    Cap  oil lines and plug holes after removing lines.  Contamination of the hydraulic system could result in premature failure. NOTE If more than one hydraulic line is to be removed, identify lines to assure proper installation.  Use suitable container to catch any hydraulic oil that may drain from system. 16-45