16-8. FRAME TILT VALVE - REPAIR (Contd)
Install disk assembly (12) on shaft (13).The side
of disk assembly (12) with holes drilled through it
must face away from cap (20).Ensure that one of
two holes drilled on outer surface of disk
assembly (12) align with stop pin (19).
Install shaft washer (11) on shaft (13).
Install four seal springs (10), eight back-up rings
(9), four new O-rings (8) and four seals (7) in
Install new O-ring (6) in groove on body (5).
Install body (5) to cap (20). Install four socket
head screws (4).
INSTALL FRAME TILT VALVE, TM10-3930-660-20.