16-7. FRAME TILT/BRAKES RELIEF VALVE - REPAIR (Contd)
Install spring (6), plunger (7) and seat (8) in cap
Install cap (9).Ensure that spring (13) is
positioned over seat (8).
Install setscrew (3) using the same number of
turns as was noted during removal.
Install jam nut (1) and tighten to hold setting.
Install two new O-rings (5) with sealing washers
Hold jam nut (1) in position and install acorn nut
INSTALL FRAME TILT/BRAKES RELIEF VALVE,