TM10-3930-660-34 14-3.  CAB ASSEMBLY WITH ROPS/FOPS - REPLACE/REPAIR (Cont’d) 10. REMOVE CAB ASSEMBLY.  HAVE ASSISTANT CHECK FOR ANY ELECTRICAL OR HYDRAULIC CONNECTIONS WHICH MIGHT HAVE BEEN MISSED AND NEED TO BE DISCONNECTED. CAUTION When placing cab on stands, be sure no hoses   or   wires   are   between   cab   and stands.    Failure  to  follow  this  procedure may result in damage to hoses or wiring. 11. PLACE CAB ON SUITABLE STANDS. DISASSEMBLY NOTE If necessary, components may be removed  from    old  cab  and  installed  on new cab assembly. 1. REMOVE TURN SIGNAL SWITCH, TM10-3930-660-20. 2. REMOVE STEERING WHEEL AND COLUMN, TM10-3930-660-20. 3. REMOVE STEERING CONTROL VALVE, TM10-3930-660-20. 4. REMOVE TRANSMISSION SHIFTER AND CABLES, TM10-3930-660-20. 5. REMOVE BACK-UP ALARM SWITCH, TM10-3930-660-20. 6. REMOVE GAGES AND METERS, TM10-3930-660-20. 7. REMOVE MAIN LIGHT SWITCH. TM10-3930-660-20. 8. REMOVE START/RUN CONTROL, TM10-3930-660-20. 14-6