TM10-3930-660-34 13-3. FRAME ASSEMBLY - REPAIR (Cont’d) CAUTION Do not weld door side of hinge (7) to frame (4). Welding incorrect half of hinge (7) to frame (4) will result in damage to frame (4) and hinge (7). c. Weld hinge (7) to frame (4) at several points along pin side, TM9-237. 3.  INSTALL NEW CONDUIT (6) IN HOLE (10) IN FRAME (4). 4. INSTALL NEW CONDUIT (5) IN HOLE (9) IN FRAME (4). 5. INSTALL CROSS MEMBER (1). a.  Install cross member (1) onto frame (4) and secure with eight capscrews (2) and eight new lockwashers (3). b.  Apply Loctite 271 to threads of capscrews (2). c.  Torque capscrews (2) to 210 lb. ft. 13-4