TM10-3930-660-34 12-6 TIE ROD - REPLACE (Cont’d) 2.  CONNECT ROD ENDS OF STEERING CYLINDERS (1) TO BALL JOINTS (2) a. Swing cylinder (1) toward axle until cylinder rod end is aligned with socket of ball joint (2) b. Screw cylinder rod end into socket of ball joint (2) until number of threads visible is the same as noted in step la of removal section c. Tighten nut and capscrew (3) of clamp (4) to 50-65 lb ft d. Repeat steps a - c for other steering cylinder 3. REMOVE BLOCKING MATERIAL FROM WHEELS OF VEHICLE 4. ADJUST TIE ROD, TM10-3930-660-20 12-15/(12/16 Blank)

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business