TM 10-3930-660-34 9-6 . REAR PLANETARY WHEEL ENDS --- REPLACE This task covers: a. Removal b. Cleaning c. Inspection d. Installation Initial Setup Tools Materials/Parts Tool Kit ,  Automotive Mechanics Gear Lubricating Oil (App .  B , Item 32) Shop Equipment ,  Automotive Lint-Free Rags (App .  B ,  Item 38) Maintenance ,  Common #2 Less Power Oil Pan RTV-732 Clear Sealing Compound Shop Equipment ,  Automotive   (App .  B ,  Item 7) Maintenance and Repair; Field Snap Ring (5 ,  9) Maintenance ,  Basic ,  Less Power Lifting Device (Capacity 2000 lb.) Fabricated Tool-Hub Drag Tool (App .  C ,  Fig .  C-4) 4 inch by 4-1/2 inch deep six-point socket Equipment Condition Rear of vehicle raised 8 inches Wheel assembly removed , and supported under rear axle. TM10-3930-660-20. Planetary wheel end drained , Rear disc brake assembly removed , LO10-3930-660-12. para .   10-3. REMOVAL 1. REMOVE PLANETARY GEAR ASSEMBLY. a. Mark planetary spider (1) and wheel hub (2) for correct alignment during installation. b. Place a suitable container under planetary wheel end assembly. c. Remove sixteen capscrews (3) and sixteen flatwashers (4) from planetary spider (1). d. Place three capscrews (3) in jack screw holes (A) and tighten to remove planetary spider (1). 9-32