TM 10-3930-660-34 9-4.  AXLE PIVOT PIN - REPLACE This task covers: a.  Removal b.  Installation Initial Setup Tools Materials/Parts Shop Equipment,  Automotive Locknut (2) Maintenance and Repair, Common Wood Blocks #1 Less Power Personnel Required Equipment Condition Two Personnel Vehicle parked on level surface, park brake set. REMOVAL 1. RAISE VEHICLE BY THE FRAME SO THAT WEIGHT OF VEHICLE IS OFF PIVOT PIN (1).  DO NOT RAISE VEHICLE OFF GROUND. 2. SUPPORT VEHICLE UNDER FRAME USING SUITABLE STANDS. 3. REMOVE LOCKNUT (2) AND RETAINING BOLT (3).DISCARD LOCKNUT (2). 4. REMOVE AXLE PIVOT PIN (1). INSTALLATION 1. INSTALL AXLE PIVOT PIN (1). 2. INSTALL RETAINING BOLT (3) AND NEW LOCKNUT (2). 3. TORQUE RETAINING BOLT (3) TO 100 LB. FT. 4. RAISE VEHICLE AND REMOVE STANDS. 5. LOWER VEHICLE. 9-8