TM 10-3930-660-34 8-6.  FRONT PLANETARY WHEL ENDS - REPLACE This task covers: a.  Removal b.  Cleaning c.  Inspection d.  Installation Initial Setup Tools Materials/Parts Tool Kit,  Automotive Mechanics Gear Lubricant (App.  B,  Item 32) Lint-Free Rags (App.  B,  Item 38) Shop Equipment, Automotive Oil Pan Maintenance, Common #2 Less Power RTV-732 Clear Sealing Compound (App.  B,  Item 7) Shop Equipment, Automotive Snap Ring (5,  9) Maintenance and Repair; Field Maintenance, Basic, Less Power Lifting Device (Capacity 2000 lb.) Fabricated Tool - Hub Drag Tool (App.  C,  Fig.  C-4) 4 inch by 4-1/2 inch deep six-point socket Equipment Condition Front of vehicle raised 8 inches Wheel assemblies removed, and supported under front axle, TM10-3930-660-20. TM10-3930-660-20. Front disc brake assemblies Planetary wheel ends drained, removed, para.  10-3. L010-3930-660-12. REMOVAL 1. REMOVE PLANETARY GEAR ASSEMBLY. a. Mark planetary spider (1) and wheel hub (2) for correct-alignment during installation. b. Place a suitable container under planetary wheel end assembly. c. Remove sixteen capscrews (3) and sixteen flatwashers (4) from planetary spider (1). d. Use three capscrews (3) in jack screw holes (A) and tighten to remove planetary spider (1). 8-33