| |
TM10-3930-660-34
8-4.
AXLE PIVOT - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Materials/Parts
Tool Kit, Automotive Mechanics
Locknut (2)
Shop Equipment, Automotive
Maintenance, Common #2
Personnel Required
Less Power
Two Personnel
Equipment Condition
Frame tilt cylinder removed,
TM10-3930-660-20.
REMOVAL
1.
RAISE VEHICLE BY THE FRAME SO THAT
WEIGHT OF VEHICLE IS OFF PIVOT PIN
(1). DO NOT RAISE VEHICLE OFF
GROUND.
2.
SUPPORT VEHICLE UNDER FRAME USING
SUITABLE STANDS.
3.
REMOVE LOCKNUT (2) AND RETAINING
CAPSCREW (3). DISCARD LOCKNUT (2).
4.
REMOVE AXLE PIVOT PIN (1).
INSTALLATION
1.
INSTALL AXLE PIVOT PIN (1).
2.
INSTALL RETAINING CAPSCREW (3) AND
NEW LOCKNUT (2).
3.
TORQUE RETAINING CAPSCREW (3) TO
100 LB. FT.
4.
RAISE VEHICLE AND REMOVE STANDS.
5.
LOWER VEHICLE.
6.
INSTALL FRAME TILT CYLINDER,
TM10-3930-660-20.
8-9
|
