| |
TM10-3930-660-34
8-3.
FRONT AXLE ASSEMBLY - REPLACE/REPAIR (Cont’d)
10.
SECURE AXLE PIVOT PIN WITH RETAINING
CAPSCREW (9) AND NEW LOCKNUT (8)
TORQUE CAPSCREW (9) TO 100 LB FT
11.
USE A FLOOR JACK TO RAISE FRONT OF
VEHICLE UNTIL VEHICLE FRAME CLEARS
JACKSTANDS; REMOVE JACKSTANDS AND
CAREFULLY LOWER VEHICLE
12.
CONNECT FRONT STEERING CYLINDER
HYDRAULIC SUPPLY HOSES (7)
13.
CONNECT AXLE BREATHER HOSE (3) IN
FRAME WITH CLAMP (6), NEW
LOCKWASHER (5), AND NUT (4)
14.
INSTALL FRONT DISC BRAKE ASSEMBLIES,
PARA 10-3
15.
INSTALL FRAME TILT CYLINDER,
TM10-3930-660-20
16.
INSTALL FRONT PROPELLER SHAFT,
TM10-3930-660-20
17.
INSTALL PARKING BRAKE CABLE,
TM10-3930-660-20
18.
REMOVE WOOD BLOCKS FROM BETWEEN
FRAME PADS (1) ON REAR AXLE AND
FRAME TILT STOP PADS (2)
19.
BLEED HYDRAULIC STEERING
CYLINDERS, BY ROTATING STEERING
WHEEL 5 TIMES
8-8
|
