TM10-3930-660-34 7-9.  TRANSMISSION OIL PUMP - REPLACE/REPAIR (Cont’d) k.   Remove capscrew (26) and expansion plug (27) if necessary. CLEANING See Cleaning Instructions, para. 2-10. INSPECTION See Inspection Instructions, para. 2-11. ASSEMBLY 1. ASSEMBLE TRANSMISSION OIL PUMP PARTS (13-28). a.   If removal was necessary, install expansion plug (27) and capscrew (26). b.   Install bearing (25) 0.015 inch below surface in housing (2). c.   Install thrust race (24) and woodruff key (21) on shaft (14). Insert shaft (14) in housing (2). d.   Install bearing (20) in retainer (17). e.   Install two piece geroter (19) on shaft (14). The geroter must assemble freely over woodruff key (21) in shaft (14). f. Install retainer (17) on housing (2). Ensure that scribe marks align. g.   Apply lute or alumilastic to threads of capscrews (18). Install six capscrews (18). Torque capscrews (18) to 17 ft. lbs. h.   Install sleeve spacer (23) and sleeve adapter (22) on shaft (14). i. Install bearing (16) and gear (15) on end of shaft (14). 7-56