TM10-3930-660-34 7-7. TRANSMISSION INPUT SHAFT - REPLACE/REPAIR This task covers: a. Removal c. Cleaning e. Installation b. Disassembly d. Assembly INITIAL SETUP: Tools Materials/Parts Tool Kit, Automotive Mechanics Gasket (9) Shop Equipment, Automotive Grease (App. B, Item 11) Maintenance, Common #2, Less Power Loctite #242 (App. B, Item 41) Equipment Condition Transmission assembly removed para. 7-4 REMOVAL 1 REMOVE FRONT COVER ASSEMBLY (1), TORQUE CONVERTER (2) AND FRONT HOUSING (3) AS A UNIT FROM MAIN CASE. a.   Attach a hoist with sling, or other suitable lifting device, to front cover assembly (1), torque converter (2) and front housing (3) as a unit. b.   Remove cap screws (4-6), three cap screws (7) and four cap screws (8) which secure front cover assembly (1) to main case. c.   Use the hoist to lift unit off main case. d.   Remove and discard gasket (9). 7-47