TM10-3930-660-34 7-4. TRANSMISSION ASSEMBLY - REPLACE/REPAIR (Cont’d) 13. CONNECT   TRANSMISSION   CABLES   (13   AND 14) TO TRANSMISSION CONTROL VALVE. a. Connect transmission cables (13 and 14) to transmission control valve. NOTE Ensure  that  cables  (13  and  14)  are  connected  correctly for proper function. b. Install  four  nuts  (15)  that  secure  clamps  for transmission cables (13 and 14). c. Install washer (12) and new cotter pin (11) for each    transmission    cable    (13    and    14)    at transmission control valve. 14. APPLY  LOCTITE  #242  ON  THREADS  OF  FOUR CAPSCREWS (8). SLIDE YOKE OF TRANSMISSION PROPELLER SHAFT (10) TOWARD   TRANSMISSION   INPUT   YOKE   AND SECURE WITH FOUR NEW LOCKWASHERS (9) AND FOUR CAPSCREWS (8).TORQUE CAPSCREWS TO 45 LB.  FT. 7-35