TM10-3930-660-34 7-4. TRANSMISSION ASSEMBLY - REPLACE/REPAIR (Cont’d) 12. TAG AND DISCONNECT HOSE (30) AT MAIN CONTROL VALVE ASSEMBLY.  MOVE ALL OTHER HOSES TO EITHER SIDE OF TRANSMISSION TO PROVIDE CLEARANCE. 13. TAG AND DISCONNECT TWO LEADS FROM NEUTRAL SAFETY SWITCH (31). 14. REMOVE PARTS (32-37,  40-42) AND RIGHT FRONT TRANSMISSION MOUNTING BRACKET (38). a. Remove two hex head capscrews (32),  two nuts (33), two rebound washers (34) and two rubber mounts (35). NOTE Weight of transmission approximately 950 lbs. b. Use a hoist with slings or other suitable lifting device to support transmission.  Place slings under input yoke and output yokes. Secure slings together. c. Remove four hex head capscrews (36),  four lockwashers (37) and right front transmission mounting bracket (38).  Discard lockwashers (37). NOTE Place a drift and wedge between capscrew (39) and side of rear transmission mount to prevent capscrew (39) from moving when removing nut (40). d. Remove nut (40),  rebound washer(41) and rubber mount (42) from rear transmission mount. 15. REMOVE TRANSMISSION (43). a. Use hoist to slowly lift transmission (43) until it clears vehicle frame.  Ensure that hoses and other obstructions are clear of transmission during removal. 7-12