| |
TM10-3930-660-34
6-8. MAIN WIRING HARNESS - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Materials/Parts
Lockwashers (13, 17)
Tool Kit, Auto Mechanics
Equipment Condition
Negative battery cable
disconnected, TM10-3939-660-20.
REMOVAL
1.
UNPLUG 25 MALE CONNECTORS (1), THREE
SPADE TERMINALS (2) AND FEMALE
RECEPTACLE (3) FROM DEVICES INDICATED.
2.
DISCONNECT FOUR TERMINAL RINGS (4),
TWO TERMINAL RINGS (5), EIGHT TERMINAL
RINGS (6), TERMINAL RING 7), TWELVE
TERMINAL RINGS (8), TERMINAL RING (9),
TERMINAL RING (10), TERMINAL RING (24),
AND TERMINAL RING (11) FROM DEVICES
INDICATED.
3.
TO DISCONNECT GROUND TERMINAL RINGS
(6 AND 7), REMOVE FIVE NUTS (12), FIVE
LOCKWASHERS (13) AND FIVE
FLATWASHERS (14). DISCARD
LOCKWASHERS (13).
4.
REMOVE FOUR CAPSCREWS (15), NUTS (16),
LOCKWASHERS (17) AND CABLE CLAMPS
(18). DISCARD LOCKWASHERS (17).
5.
CAREFULLY PUSH OUT FOUR GROMMETS
19).
6.
DISCONNECT CONNECTORS (20, 21 AND22).
7.
REMOVE MAIN WIRING HARNESS (23).
6-29
|